Installing Windows; Functions - ASROCK ALIVEDUAL-ESATA2 - V1.2 User Manual

Table of Contents

Advertisement

2.14.2 Installing Windows

2.14.2 Installing Windows
2.14.2 Installing Windows
2.14.2 Installing Windows
2.14.2 Installing Windows
RAID F
RAID F
RAID F
RAID Functions
RAID F
unctions
unctions
unctions
unctions
If you want to install Windows
with RAID functions, please follow below steps.
®
Since NVIDIA
RAID function is not available on SATA ports of this motherboard under
®
Windows
Vista
64-bit OS on this motherboard, RAID function is only available on SATAII
ports.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. If you plan to install Windows
with RAID functions, please set the "PCIE-SATAII Operation Mode" option to
[RAID].
STEP 2: Make a SATAII driver diskette. (For JMicron
mode only.)
If you set "PCIE-SATAII Operation Mode" to [RAID] mode, and plan to install
®
TM
TM
Windows
Vista
/ Vista
on page 33 for detailed procedures of making a SATAII driver diskette.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide of the document in the following path in the Support CD:
.. \ RAID Installation Guide
®
STEP 4: Install Windows
®
TM
Insert the Windows
Vista
your system, and follow the instruction to install Windows
on your system.
If you plan to install Windows
you see "Where do you want to install Windows?" page, please click the "Load Driver"
button on the left on the bottom to load the JMicron
diskette you just made.
After that, please insert Windows
drive again to continue the installation.
Vista
Vista
Vista
/ Vista
/ Vista
/ Vista
Vista
Vista
/ Vista
/ Vista
® ® ® ® ®
TM
TM
TM
TM
TM
®
Vista
TM
or Vista
TM
64-bit on your SATA / SATAII HDDs
®
does not provide Windows
Vista
TM
TM
/ Vista
64-bit OS. If you install Windows
Advanced screen
®
TM
TM
Vista
/ Vista
64-bit on JMicron
®
64-bit on JMicron
SATAII HDDs, please refer to step 2
TM
TM
Vista
/ Vista
64-bit OS on your system.
TM
/ Vista
64-bit optical disk into the optical drive to boot
®
Vista
TM
/ Vista
TM
64-bit on JMicron
®
RAID drivers from the SATAII driver
®
Vista
TM
/ Vista
TM
64-bit optical disk into the optical
3 5
3 5
3 5
3 5
3 5
64-bit With
64-bit With
64-bit With
64-bit With
64-bit With
TM
TM
TM
TM
TM
TM
TM
/ Vista
64-bit RAID driver,
®
TM
Vista
/ Vista
IDE Configuration.
®
SATAII ports
®
SATAII ports in RAID
®
TM
TM
Vista
/ Vista
64-bit OS
®
SATAII HDDs, when
TM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alivedual-esata2

Table of Contents