Table of Contents
Advertisement
SmartMonitor Sensor Setup Tool for Personal Computer
Connection
Appearance
ZX-series
Communications
Interface Unit
ZX-series Commu-
nications Interface
Unit + ZX-series
Sensor Setup Soft-
+
ware Basic
CD-ROM
CD-ROM
ZX-series Sensor
Setup Software
Note: *1. When using the ZX-TDA11/41 with the SmartMonitor, either the
ZX-SFW11EV3 or the ZX-SW11EV3 SmartMonitor must be used.
Earlier versions cannot be used.
Note: *2. The ZX-SFW11EV3 SmartMonitor can be used for parameter setting,
data logging and waveform monitoring.
Specifications
Sensor Heads
Item
Measurement range
Maximum actuator travel distance
Resolution (See note 1.)
Linearity (See note 2.)
Operating force (See note 3.)
Degree of protection (Sensor
Head)
Mechanical durability
Ambient temperature
Ambient humidity
Temperature
Sensor Head
characteristic
Preamplifier
(See note 4.)
Weight (packed state)
Materials
Sensor Head
Preamplifier
Accessories
Note 1. The resolution is given as the minimum value that can be read when a ZX-TDA@1 Amplifier Unit is connected. This value is taken 15 min-
utes after turning ON the power with the average number of operations set to 256.
2. The linearity is given as the error in an ideal straight line displacement output.
3. These figures are representative values that apply for the measurement mid-point, and are for when the provided actuator is used, with
the actuator moving downwards. If the actuator moves horizontally or upwards, the operating force will be reduced. Also, if an actuator
other than the standard one is used, the operating force will vary with the weight of the actuator itself.
4. These figures are representative values that apply for the mid-point of the measurement range.
B-78
Name
Model
ZX-SF11
ZX-
SFW11EV3
*1, *2
ZX-SW11EV3
*2
ZX-TDS01T
1 mm
Approx. 1.5 mm
0.1 µm
0.3% F.S.
Approx. 0.7 N
IEC60529, IP67
10,000,000 operations min.
Operating: 0° C to 50° C (with no icing or condensation)
− 15° C to 60° C (with no icing or condensation)
Storage:
Operating and storage: 35% to 85% (with no icing or condensation)
0.03% F.S./° C
0.01% F.S./° C
Approx. 100 g
Stainless steel
Polycarbonate
Instruction manual, Preamplifier Mounting Brackets (ZX-XBT1)
Cables with Connectors on Both Ends (for Extension)*
Cable length
1 m
ZX-XC1A
4 m
ZX-XC4A
8 m
ZX-XC8A
Note: *Robot Cable models are also available.
The model numbers are ZX-XC@R.
Preamplifier Mounting Brackets
Appearance
ZX-XBT1
ZX-XBT2
Cables with Connectors on Both Ends (for Extension)
Cable length
1 m
ZX-XC1A
4 m
ZX-XC4A
8 m
ZX-XC8A
ZX-TDS04T
4 mm
Approx. 5 mm
Displacement sensors / Width-measuring Sensors
Model
Quantity
1
Model
Remarks
Attached to each
Sensor Head
For DIN track mount-
ing
Model
Quantity
1
ZX-TDS04T-L
Approx. 0.25 N
IEC60529, IP54
Advertisement
Table of Contents
