Omron ZS Command Reference Manual page 65

- When a mode other than above is selected
Value Details
0 No accumulation
1 Distance value
(measurement value)
When using ZS-HLDC
- When multi-task mode is OFF
- When GLASS/MODE 2 or GLASS THICKNESS/MODE 2 is selected for the
measurement object
Unit No. Data No.
7Ch 5h
- When a mode other than the above is selected for the measurement object
Unit No. Data No.
7Ch 5h
- When multi-task mode is ON
Unit No. Data No.
7Ch Eh
Fh
10h
11h
Parameter
0 No accumulation
1 Accumulation of result of area 1
2 Accumulation of result of area 2
3 Accumulation of result of glass surface or
glass thickness
Parameter
0 No accumulation
1 Accumulation
Parameter
0 Does not accumulate the result of TASK1.
1 Accumulates the result of TASK1.
0 Does not accumulate the result of TASK2.
1 Accumulates the result of TASK2.
0 Does not accumulate the result of TASK3.
1 Accumulates the result of TASK3.
0 Does not accumulate the result of TASK4.
1 Accumulates the result of TASK4.
CompoWay/F Communication Command Reference
Section 4
Setting Parameters
Details
Details
Details
4-9
ZS Series