Advertisement
Note
Output function of the read results
•The output order
The read results can be output on the serial interface. When the calculation results are output at the same time,
the calculation results are output first, followed by the read results (text string).
•Code conversion
The following character codes need to be converted for output. The texts after conversion are output.
Character code Before conversion After conversion
Comma
&h2c
Tab
&h09
Space
&h20
CR
&h0D
LF
&h0A
Example: Output of read results together with two expressions
Read result: ABC
[Expression] - [Data0]: 123
[Expression] - [Data1]: 456
The output order is as follows:
123,456 (delimiter)
ABC (delimiter)
Note
Measurement control function
This function enables control of the next measurement item to be executed based on the verification results with the
master data. The overall judgment result does not reflect the measurement items that are not executed.
Example: Measurement of product A and product B are branched according to the verification results.
Measurement Item0 : Barcode
Measurement Item1 : Pattern Search
Measurement Item2 : Area
Measurement Item3 : Area
Measurement Item4 : Pattern Search
Measurement Item5 : Area
Measurement Item6 : Area
Setting master data 0
•Register the barcode of product A.
•First meas. Item No.: 1
Last meas. Item No.: 3
Setting master data 1
•Register the barcode of product B.
•First meas. Item No.: 4
Last meas. Item No.: 6
Registering master data, First meas. Item No., Last meas. Item No. p.2
Decode condition detailed settings
Be Sure to set the detailed conditions for the barcode type. Set other items as required. By AUTO setting, Code
type, Direction(Pharma) are set automatically.
&h8540
&h8541
&h8542
&h8543
&h8544
Measurement Item for Product A
Measurement Item for Product B
ZFX-C1_/C2_-CD Additional Functions Instructions
5
Advertisement
