Advertisement
Size Inspection
Multi Colors
This function measures the areas of up to four colors simultaneously, which enables to measure the difference
of color pattern. Each of the area values and differences with reference values can be output.
Important
This function cannot be used when a monochrome camera is connected.
Setup
Measurement region and up to four reference
colors can be registered.
Color 3
Image adjustment
This function picks up the color to be measured.
MENU mode - [Setup] - [Item] - [Img Adj]
Item
Select Camera
Color pickup
Region settings
This function sets the measurement region.
MENU mode - [Setup] - [Item] - [Region]
Item
Measurement region
Reference registration
12
ZFX-C1_/C2_-CD Additional Functions Instructions
Measurement region
Color 1
Color 2
Description
For details, refer to Chapter 3 "Image Adjustment" of the ZFX User's Manual.
Description
Sets the region to be measured.
When the measurement region is set, measurement is executed on the display image,
and the result of execution is registered as the reference value. To re-register only
reference values, you can use this function to re-register only reference values based on
the image currently on screen.
Measurement
The area of each color is measured, and if even one of the
area values is judged as NG, the overall judgment result is
NG.
Area of color 3
Area of color 1
Area of color 2
Advertisement
