Advertisement
Threshold
This function sets the judgment conditions.
MENU mode - [Setup] - [Item] - [Limits]
Setup Item
Description
Area 1 to 4
Sets the range of the area to be judged as OK.
Range: 0 to 9999999.999 (When calibration is OFF, the range becomes 0 to 307200.)
Detailed settings (if necessary)
Adjust the detailed conditions, if necessary.
MENU mode - [Setup] - [Item] - [Detail]
Setup Item
Setting Value
Fill profile
OFF (default value)
ON
Calibration
OFF (default value)
ON
Auto THset +/-
0 to 9999999.999
Area judgment
0 to 9999999.999
Possible output results
The following values can be output when expressions are set.
Item
Description
Judgment result (JG)
The judgment result is output. (0: OK, -1: NG, -2: not measured)
Area 1 to 4 (AR1 to 4)
The area of the measurement color is output. (0 to 9999999.999)
The area when the measurement region is set is output. (0 to 9999999.999)
Ref. area 1 to 4 (SA1 to 4)
Diff. area 1 to 4 (DA1 to 4)a
The area difference obtained by "measurement value - reference value" is output.
(9999999.999 to 9999999.999)
Description
To measure the outer periphery of the measurement target, set
this item to [ON].
When this item is set to [ON], measurement is performed with
all of the area between the start point (colors outside of
→
measurement target
measurement target color) and the end
point (measurement target color
measurement target) inside the measurement region judged to
the measurement target color.
For details, refer to the "Area" detailed settings in Chapter 3 of
the ZFX User's Manual.
Measurement results are output using the camera's coordinate values.
Measurement results are output using the coordinate value
converted by the calibration function.
When AUTO setting is executed, the value obtained by
incrementing/decrementing this value on the measured value is
set as the thresholds.
Sets the area value to be judged as the effective color. When
AUTO setting is executed, only up to four colors having an area
within these upper and lower limit values are automatically
registered.
ZFX-C1_/C2_-CD Additional Functions Instructions
→
colors outside of
13
Advertisement
