Area - Omron ZFV - V2.0 User Manual

Section 3
Customizing Measurement conditions

AREA

■ Reversing black-and-white images
Reverse the currently displayed binary image.
As white pixels are targeted for measurement, select which part of the measured area
is to be set to white pixels.
MENU Mode-[CUSTM]-[COLOR]
WHITE (default value)
BLACK
■ Changing the binarization level
Set the level for converting 256-tone contrast image captured from Sensor Head to a
binary image.
MENU Mode-[CUSTM]-[BINARY]
0 to 255
ZFV
74
User's Manual
Setting
Select which part of the measurement area is to be set as white pixels.
Setting
As white pixels are targeted for measurement, adjust the binarization level so
that the measurement area is converted to white pixels.
Lower
Upper/lower
limit limit
LEFT/RIGHT keys: Select upper limit/lower limit.
UP/DOWN keys:
Description
Description
Upper
limit
Change values.