Setting Flow - Omron ZFV - V2.0 User Manual

Section 3

Setting Flow

Setting Flow

Installation and Connection Installation and Connection
Set the Sensor Head and Amplifier Unit.
Adjusting the Image Adjusting the Image
Adjust the focus of the image.
(Only when Amplifier Units are gang-mounted)
Settings in an application extended connection Settings in an application extended connection
Set the processing details for each Amplifier
Units.
Executing Teaching Executing Teaching
Execute teaching, and register the judgement
criteria.
External I/O External I/O
Set how to output the measurement values.
Adjusting threshold values Adjusting threshold values
Adjust the threshold values for judging the
measurement result.
Saving the set measurement conditions Saving the set measurement conditions
Perform Measurement Perform Measurement
Set measurement conditions are saved to the amplifier unit "when external TEACH signal teaching is suc-
cessful" or "when switched to RUN mode." When the TEACH key is pressed from the teaching screen to
teach, contents will not be saved unless switched to RUN mode once.Changed contents, including teach-
ing results, are cleared when switching off without saving.
ZFV
42
User's Manual
Power ON
SECTION 2
INSTALLATION & CONNECTION p.22
SECTION 2
INSTALLATION & CONNECTION p.38
p.69
Key Operation Teaching p.48
External Signal Input Teaching p.35
p.65
p.55
p.82
p.59