Program Setting Screens - Omron WS02-NSFC1-EV3 - 12-2007 Operation Manual

Segment Program 3 (Block Model 158)

6-19-3 Program Setting Screens

122
■ Step Data Setting Screen
1 2
5
6
1: Read Button
This button reads the step data from the Loop Control Board/Unit. The steps
displayed on the screen indicate the range of steps that can be read.
Any settings made on the screen will be discarded if the Read Button is clicked
before clicking the Write Button.
2: Write Button
This button writes the step data settings to the Loop Control Board/Unit. The
steps displayed on the screen indicate the range of steps that can be written.
3: Backup Button
This button backs up data during operation. This is performed to back up
changed settings to the flash memory in the Loop Control Board.
The backup during operation function backs up the function blocks in the RAM
in the Loop Control Board to the flash memory in the Loop Control Board.
4: GRF and BNK Buttons
GRF Button: Opens the Step Data Graph Display Screen.
BNK Button: Opens the Bank Data Setting Screen.
5: Step Display Switching Buttons
Up to 10 steps can be displayed on each Step Data Setting Screen. These
buttons display a different group of 10 steps.
01-10: Displays steps 1 to 10
11-20: Displays steps 11 to 20
21-30: Displays steps 21 to 30
4
3
Section 6-19