About This Manual - Omron WS02-9094G - V1.0 Operation Manual

About this Manual

This manual describes the CX-Profibus Configurator for the CS1W-PRM21 and CJ1W-PRM21
PROFIBUS DP and PROFIBUS DP-V1 Master Units.
This manual describes CX-Profibus and the PROFIBUS Master and slave DTM supplied with it. how to
operate it. These software components are required to control and operate the CS1/CJ1W-PRM21
PROFIBUS DP and PROFIBUS DP-V1 Master units. or more information on the CS1/CJ1W-PRM21
Master unit, refer to the CS1/CJ1W-PRM21 PROFIBUS Master Units Operation Manual (W409-E2-@).
Please read this manual carefully so that you understand the information provided before using CX-
Profibus and the PROFIBUS Master Units. Start with the precautions in the following section. They
describe the operating environment and application safety measures which must be observed prior to
and when using the PROFIBUS Master Unit.
The sections of this manual are as follows:
Section 1 introduces PROFIBUS and Cx-Profibus.
Section 2 describes Cx-Profibus and the DTMs in detail.
Section 3 describes the operational aspects of CX-Profibus.
Section 4 provides procedures for troubleshooting the PROFIBUS network and the Units.
The Appendices contain information supplementary to the information in the main body of the man-
ual. They are referred to in the various sections as required.
Manual
CS-series
Programmable Controllers
Operation Manual
CJ-series
Programmable controllers
operation Manual
CS/CJ-series
Programmable Controllers
Programming Manual
CS/CJ-series
Programmable Controllers
Instructions Reference Manual
CX-Programmer
Operation Manual
CX-Server
Run Time User Manual
CS1/CJ1W-PRM21
Operation Manual
C200H-series PROFIBUS DP
Master Units
Operation Manual
Products
SYSMAC CS-series
CS1G/H-CPU@@-E
SYSMAC CJ-series
CJ1G-CPU@@
SYSMAC CS/CJ-series
CS1G/H-CPU@@-E, CJ1G-
CPU@@
SYSMAC CS/CJ-series
CS1G/H-CPU@@-E, CJ1G-
CPU@@
SYSMAC WS02-CXP@@-E
CX-Programmer
CX-Server
SYSMAC CS/CJ-series
CS1/CJ1W-PRM21
PROFIBUS DP Master Units
Operation Manual
C200HW-PRM21 PROFI-
BUS DP Master Unit
Contents
Describes the installation and operation of
the CS-series PLCs.
Describes the installation and operation of
the CJ-series PLCs.
Describes the ladder diagram programming
instructions supported by CS/CJ-series
PLCs.
Describes the ladder diagram programming
instructions supported by CS-series and
CJ-series PLCs.
Provides information on how to use the CX-
Programmer, programming software which
supports CS1/CJ1-series PLCs.
Provides information on how to use the CX-
Server communication driver software
which supports CS1/CJ1-series PLCs.
Provides information on how to install and
use the CS1/CJ1-PRM21 PROFIBUS Mas-
ter units.
Describes the Installation and Operation of
the C200HW-PRM21 PROFIBUS DP Mas-
ter Units.
Cat. No.
W339-E1-@
W393-E1-@
W394-E1-@
W340-E1-@
W414-E1-@
W391-E2-@
W409-E2-@
W349-E2-@
ix