Omron WS02-9094G - V1.0 Operation Manual page 40

CX-Profibus
Error Log view Context Menu
Menu item
Clear all entries Clears the entire Error Log view.
Copy to clipboard Copies the entire contents of the Error Log view to the clipboard.
Hide Hides the Error Log view.
FDT Monitoring view
FDT Monitoring view Context Menu
Menu item
Clear all entries Clears the entire FDT Monitoring view.
Copy to clipboard Copies the entire contents of the FDT Monitoring view to the clip-
board.
Hide Hides the FDT Monitoring view.
Description
The FDT Monitoring view displays the communication between the FDT Con-
tainer application (i.e. CX-Profibus) and any of the DTMs. The communication
is listed as a sequence of function calls from the CX-Profibus to a DTM and
vice versa.
Note The FDT Monitoring view is hidden by default. After starting CX-Profibus, the
window will be displayed, by selecting the View - FDT Monitoring option from
the main menu.
The purpose of the FDT Monitoring view is troubleshooting in case problems
occur with third party DTMs. The contents of the window can be copied to the
clipboard, to allow it to be pasted into another document or into an E-mail.
The messages themselves as well as the sequence of messages may hold
additional clues in case of problems.
The format used in the FDT Monitoring view is
Time: <Time> Date: <Date> - <Information Type> <message>
The message may include the name of the DTM involved in the communica-
tion.
The figure below shows an example of an FDT Monitoring message
sequence. This example sequence is generated when opening a CJ1W-
PRM21 PROFIBUS Master Unit DTM.
By right-clicking the mouse cursor in the FDT Monitoring view, a context
menu is displayed. This context menu provides the options listed below.
Description
Section 2-2
Equivalent menu command
---
---
View - Error Logging
Equivalent menu command
---
---
View - FDT Monitoring
25