Creating Sfc Programs - Omron SFC - INTRODUCTION GUIDE Introduction Manual

2-4

Creating SFC Programs

Add an SFC program.
When a new project is created, it will automatically be configured for ladder programming.
1 Delete the ladder program.
Ladder programs are not used in this
example. Delete the existing ladder program
and add an SFC program.
On the project workspace, right-click New
Program 1 (00), and select Delete from the
pop-up menu.
A dialog box will be displayed to confirm
deletion.
Click Yes.
The default ladder program will be deleted,
and the ladder editor will be closed.
2 Add an SFC program.
On the project workspace, right-click
Programs, and select Insert Program - SFC
from the pop-up menu.
2-4 Creating SFC Programs
2-11
2