Advertisement
Another method is to use a special screen which allows data entry. Here, the format in which
data is edited is user definable. When this special screen is triggered, the operator can enter the
new data using the arrow keys and the CLR and ENT keys. Coils can also be edited this way.
H
ow is the unit configured?
Each unit MUST be configured using the Windows based setup software provided with the unit.
The software is quite easy to use and contains comprehensive online help.
Invoke the NT2 ST software that is installed on your PC.
The software can be used either from the pull down menus or by using the comprehensive
Toolstation that appears on the bottom half of the Window.
Each tool has balloon help
associated with it to help identify the function. If the Toolstation does not appear on your screen,
it can be turned on using the "Options" pull down menu.
Select NEW project by clicking on the corresponding tool. A window will appear showing all the
available products. Select the NT2S A. The bitmap of the unit will appear on the screen.
Select your PLC from the list of available drivers. Also select the correct PLC model that you are
using. The Toolstation now will allow you to configure the NT2S A. If any error screen indicating
that "PLC driver is not found" appears, contact factory for support.
Advertisement
