Mounting And Removing Memory Cards - Omron NSH5 Operation Manual

Memory Cards
Note
Note
3-5-2

Mounting and Removing Memory Cards

Mounting a Memory Card
1,2,3...
• Screen data (data used in the PT display)
The transfer method is manual transfer (i.e., the data to be transferred
and the transfer direction are selected manually), and operations are
specified from the System Menu.
There are four recommended Memory Card models, each of which, has a dif-
ferent capacity.
Model
HMC-EF183 128 MB
HMC-EF283 256 MB
HMC-EF583 512 MB
A Memory Card can be overwritten approximately 100,000 times. When using
a PC card socket in devices such as notebook computers, use an HMC-
AP001 Memory Card Adapter.
Use the Memory Cards recommended by OMRON. Operation may not be cor-
rect if other memory cards are used.
1. As shown below, to mount the Memory Card to the Memory Card interface
first loosen the two screws securing the cover on the top of the PT.
Capacity
Flash memory
Flash memory
Flash memory
Section 3-5
Memory type
39