Omron NSA12-15-TX11B User Manual page 87

(2) IDE Channel 2 & 3 Master Sub-Menu: IDE Settings
Function
Type [Auto]
None
ATAPI Removable
CD-ROM
IDE Removable
Other ATAPI
User
Multi-Sector Transfers [Disabled]
(Not available if the
Auto option is
selected)
LBA Mode Control [Disabled]
(Not available if the
Auto option is
selected)
32 Bit I/O [Disabled]
Enabled
Transfer Mode [Standard]
(Not available if the
Auto option is
selected)
Ultra DMA Mode [Disabled]
(Not available if the
Auto option is
selected)
Note: The settings shown in the table are initial values.
The settings shown in the table above are values with a SATA hard disk connected.
Setting
Sets the type of device that is
connected to the system.
Sets the number of sectors sent per
block.
Enables the LBA mode.
Enables or disables 32-bit data transfers
between the CPU and IDE.
Selects the method used to transfer
data between the hard disk and system
memory.
Sets the ultra DMA mode for
transferring data.
Appendix 1 BIOS Setup
Appendix 1-5 Main Menu
Description
Appendix-7
Appendix