Omron NSA12-15-TX11B User Manual page 80

5-3 Troubleshooting Guide
5-3-1 Remedies for Problems
5
5-8
Problem
Failure notification is not given.
The date or time of the RAS log
does not match the date or time
of the OS.
There is insufficient memory.
Possible cause
Failure notification is disabled.
The DIP switch is set to disable
the Action on Errors Function.
The date or time in the OS was
changed.
The memory capacity is
insufficient.
Remedy
Enable failure notification. Refer
to 4-4-2 Setting the Failure
Notification Function.
Set the DIP switch to disable the
Action on Errors Function and
restart the device. Refer to 3-3
Installing a PCI Board and
Setting the DIP Switch.
Set the time for RAS before
setting the time for the RAS
Utility. Refer to 4-4-4 Log Filter
(Filter and Find).
Close all unnecessary
applications. If memory is still
insufficient after closing
unnecessary applications, set up
virtual memory. For information
on setting up virtual memory,
refer to Appendix 6 Using Virtual
Memory.