3-6 Adjusting the Touch Panel and
Display
3-6-1 Calibrating the Touch Panel
This section describes the procedure for calibrating the touch panel.
1. Calibrate the touch panel whenever it deviates markedly from its coordinate.
Connect a USB keyboard and mouse to the NSA-series Industrial PC before
calibrating the touch panel. Make sure the keyboard and mouse are properly
connected.
2. Start up the NSA-series Industrial PC and select Start – Programs – UPDD –
Settings from the bottom left corner of the screen to launch the settings
program.
3. Click the Calibration Tab on the Pointer Device Properties Menu, then click
the Calibrate Button.
3-6 Adjusting the Touch Panel and Display
Calibrate Button
3-6-1 Calibrating the Touch Panel
Settings
Make sure the EEPROM
Calibration box is selected.
3
3-19