Omron NS-CXDC1-V3 User Manual page 94

Registering Contents
72
2. In the General Tab Page in the contents display Property Setting Dialog
Box, specify whether character strings or images are to be displayed.
3. Set the number of contents in the Edit Contents Toolbar. In the No. of con-
tents field, set the total number of character strings and images to be dis-
played. In the Address for switching contents, set the communications
address for switching the contents.
4. In the Contents No. field in the Edit Contents Toolbar, input the number of
the contents to be edited.
5. Select the contents display and press the Space Key.
If it is a character string that is to be displayed, input the character string.
If it is an image that is to be displayed, the File Selection Dialog Box will be
displayed. Select the image file to be displayed.
Press the
Space Key.
6. Repeat steps 4 and 5 as required for the number of contents being created.
Note Make detailed settings for the contents in the Edit Contents Dialog Box that is
displayed when the Edit Contents Button is pressed in the Edit Contents
Toolbar.
Set the number of
the contents to be
edited.
Section 4-19
Specify whether
character
strings or
images are to
be displayed.
Set the communications
address to use to switch
contents.
Set the total number of
contents to be
displayed.
If displaying a character string
has been specified, input the
character string to be
displayed.
If displaying an image has
been specified, input the
image file to be displayed.