Listing Addresses Used - Omron NS Manual

Section 5 Object Operations
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual

5-11 Listing Addresses Used

Displays a list of the number of functional objects using each address and a list of functional objects
using each address. Can also jump to specified functional object screen positions.
Displaying Lists of Used Addresses
Displays a list of addresses that are used.
1. Either select Tools – List Up Addresses Used or click the List Up Addresses Used Button on
the toolbar.
Toolbar
The List Up Addresses Used Dialog Box will be displayed.
No. Setting
1 Search
Address
No. of Addresses
Search until Max
No.
2 No. of Addresses
Displayed in 1 Line
3 Range
2. Make the settings and then click the Search Button.
3. The used bits and words are displayed for each address.
Specifies the conditions for the address search.
Sets the start address for the search range.
Specifies how many words or bits to search for from the address specified under
Address.
Select (turn ON) Search until Max No. to search until the largest bit or word from
the address specified under Address.
Sets the number of addresses displayed in one line.
Select the search range from Current Screen, Whole Project, or Screens. If As
Sheet No is selected (turned ON), functional objects in sheets will be the display
range.
Red:
White: Displays the number of
5-55

5-11 Listing Addresses Used

1
2
3
Details
Not used
used bits and words.