Section 5 Object Operations
NS-Designer Operation Manual
NS-Designer Operation Manual
NS-Designer Operation Manual
5-7-1
Setting Addresses
Click the Setting Button to the right of the setting column to display the Address Setting Dialog Box.
This section describes how to enter addresses using this dialog box.
No.
Setting
1
Host name
2
Area Type
3
Address
4
Input Button
Select the registered host name under Settings – Register Host or select the host
from PT memory.
Select the communications area.
Word or Bit specification are only displayed when those address types can be set.
For example, the Word option will not be displayed when making address settings
for ON/OFF Buttons.
Displays and sets the communications address.
The host address is expressed as a 5-digit word address or 5-digit word address
and 2-digit bit address. If the address entered here does not have enough digits,
the number of digits are automatically adjusted and the address written to the ad-
dress setting column.
Example: If word "1" is entered as the address:
"00001" will be entered in the address setting column.
Click the Input Button to enter the word or bit.
5-37
5-7 Address Settings
1
2
3
4
Details