Charging The Battery - Omron DeviceNet Safety NE1A-HDY01 Operation Manual

Using the Battery Pack
1-7-2

Charging the Battery

1,2,3...
IMPORTANT Make sure that the temperature is between 0 and 40 ° C, that the humidity is
IMPORTANT The capacity of the battery reduces to approximately 60% of its original state
The battery must be charged when using the Mobile Console for the first time
or if it has not been used for a long time
1. Insert the cable into the charger.
2. Insert the AC plug of the cable into an AC socket.
3. Insert the battery pack into the charger. The charger indicator will turn ON
when charging starts.
Charger indicator
4. Charging the battery has been completed when the green indicator turns
ON.
Note The battery takes approximately 3 hours to recharge depending on the oper-
ating environment, operating conditions, and the state of the battery.
between 20% and 85%, and that there is no condensation. The battery may
not charge fully in conditions outside these ranges. It may also damage the
battery pack.
after recharging it 300 times. Replace the Battery Pack if the charge only lasts
for a short time.
Charger Indicator
Color Status
--- Battery is not inserted.
Green Charging complete
Red Charging
Error
: Lit : Flashing
Section 1-7
Meaning
: Not lit
17