Part Names And Functions; Front - Omron DeviceNet Safety NE1A-HDY01 Operation Manual

Part Names and Functions

1-2

Part Names and Functions

1-2-1

Front

3. Power switch
8. Memory Card slot
1 LCD panel
2 Control keys
3 Power switch
4 Power status indicator
5 Battery charge indicator
6 Stylus
7 Stylus holder
8 Memory Card slot
9 USB port
10 LAN port
1. LCD panel
9. USB port
The LCD panel is a touch screen that can be used with the
stylus. Refer to 2-1-1 Main Window for the screen names.
Refer to 1-3 Control Keys.
Refer to 1-6-1 Starting and Stopping the Mobile Console.
Refer to 1-6-3 Status Indicators.
Refer to 1-6-3 Status Indicators.
This is a pen for tapping the touch screen to navigate the con-
trols. Refer to 1-4 Stylus.
The stylus can be stored in the holder when it is not being
used.
The Memory Card is inserted in this slot. Refer to 1-8 Using
the Memory Card.
The USB port is used to connect the Mobile Console to an
NE0A/NE1A-series Safety Network Controller. Refer to 1-5-1
External Connectors.
This port is for future expansion. It cannot currently be used.
Section 1-2
2. Control keys
5. Battery charge indicator
4. Power status indicator
10. LAN port (for future expansion)
7. Stylus holder
6. Stylus
7