Precautions For Correct Use; Regulations And Standards - Omron DeviceNet Safety NE1A-HDY01 Operation Manual

Precautions for Correct Use

5

Precautions for Correct Use

6

Regulations and Standards

Observe the following precautions in order to prevent Product failure, Product
malfunction, or adverse effects on the performance of the Product.
• Handling the Memory Card
Do not perform any of the following operations while the Memory Card is
being accessed. Doing so may cause data to be lost.
• Turning OFF the Mobile Console power switch
• Removing the Battery Pack
• Removing the Memory Card
• Handling the Touch Screen
• Use the enclosed stylus for touch screen operations. Using a sharp ob-
ject may scratch the touch screen surface so that the screen cannot be
used for inputs.
• Do not press hard on or rub the touch screen surface. Doing so may
not only cause damage but may break the glass.
• Cleaning
Use a clean, dry cloth for cleaning. If dirt cannot be removed using a dry
cloth, dampen the cloth with a neutral cleaning solution, wring the cloth out
tightly, and then wipe the dirty section.
Never use benzene or thinner, or other volatile solvents or chemical cloths,
to clean the Product. Doing so may discolor the surface or cause damage.
The NE1A-HDY01 has been determined to conform to the EC EMC Directive
by conforming to the following standards.
Certifying organization
TÜV Rheinland
Standards
IEC 61131-2
IEC 61000-6-4
CISPR 16-1-2
CISPR 16-2-1
CISPR 16-2-3
5
xxi