Table of Contents
Advertisement
F3SP-U5P-TGR
1
BEFORE USING THE DEVICE.
1.1
GENERAL INSTRUCTIONS.
To guarantee a correct installation, carefully follow the instructions of this
manual.
Do not touch non-insulated cables, unless they have been disconnected
from the power supply.
Make sure that the cables connected to the control unit are not too taut
and that they do not hinder the movement of persons or objects.
The control unit does not contain parts subject to maintenance; before
carrying out any outer operation, turn off the power.
Do not open the control unit for any reason (apart from the selection of the
configuration dip-switch which must be only carried out by skilled
workers) and in case of failure, send it to our laboratories indicating the
detected failure and the operation period.
Avoid touching the protective cover of the safety sensors with the hands in
order to prevent dust and/or grease build upon the device, thus reducing
the system performances.
The possible wear of the protective covers does not compromise the
system safety in any way but can cause a system tripping.
1.2
PRECAUTION OF SAFETY
The following symbols are used for highlighted items in order to ensure safe
and proper use of the F3SP-U5P-TGR. Highlighted items are critical for safe
operation and must be heeded at all time.
WARNING
NOTICE
1.3
ROUTINE MAINTENANCE.
Be sure to conduct inspection regularly.
Please refer to sec.10 and the safety PES instruction manual.
Omron Europe and Techno-GR refuses to accept any responsibility for
damage to persons or object due to the incorrect use / installation of the
control unit and safety PES.
User's manual
5
Advertisement
Table of Contents
