Omron E3X-SD Series Brochure page 2

1
Operation and Displays So Simple That Anyone Can Use the Amplifier Right Away
A design that focuses on simple operation has resulted in an Amplifier that is so simple it can be
operated without the manual.
The Amplifier also uses a large, easy-to-read operation indicator and a simple display for
excess gain (i.e., incident level/operating level).
Essentially anyone can use the Amplifier right away.
2
Wire-saving Connector to Reduce Work and Stock Management
Simplicity
No screwdriver
Fine adjustments can be made in
increments of 1% using the Up
and Down Keys.
Compact
Small body with width of 10 mm and
simple operation.
Compact size
with length of 65 mm.
999%
· · ·
Stable incident light
120%
110%
Large, easy-to-read
Operating level
100%
operation indicator
90%
80%
Stable light
interruption
· · ·
0%
Gang-mount up to 16 Amplifiers.
Master Connector
Power supply pin
Power is supplied through
only one
the connector, so
wire for output
is required
for expansion.
and High Performance
No manual
Setting is completed with a
single press when teaching
with/without the workpiece.
E3X-SD
A timer function is provided as a standard feature.
The switch is for the timer only
so no complicated operation is required.
6
Largest display
in the industry mm
Intuitive display
for excess gain
(i.e., incident level/operating level)
Large bar display with five levels:
80%, 90%, 100%, 110%, and 120%
• Large reduction in wiring work
• Simple management:
No distinction between master
and slaves
Slave Connector
10 mm
Fine tuning can be
performed using the
8-turn adjuster
(with indicator).
E3X-NA
No modes
,
Immediately determine
operation and amount
of light with a simple,
bright display.
With the E3X-SD, settings and
management can be
performed reliably using the
digital display ranging from 0%
to 999% (10 times), and with
the E3X-NA, the same can be
performed intuitively using the
large 5-level bar display.
Slide
Work efficiency is
also improved during
maintenance.