Download Print this page
Omron E3F2-Z Datasheet
Omron E3F2-Z Datasheet

Omron E3F2-Z Datasheet

Cylindrical m18 photoelectric sensor for ac power supply

Advertisement

Quick Links

Cylindrical M18 photoelectric sensor for AC power supply
E3F2-@Z
• 24 to 240 VAC power supply
• UL and CSA approved
Selection Guide
Housing material: Plastic
Sensing method
Through-
beam
Non-polarizing
Retro-
reflective
(without MSR function)
Fixed sensing distance
Diffuse
reflective
Wide-beam characteristics
Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable
(e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.
Ordering Information: type list
Sensing method,
Model
sensing range
E3F2-3LZ 2M
Through-beam, 3 m
E3F2-3DZ1 2M
Through-beam, 3 m
E3F2-3DZ2 2M
Through-beam, 3 m
E3F2-3Z1 2M
Through-beam, 3 m
E3F2-3Z2 2M
Through-beam, 3 m
E3F2-R2Z1 2M
Retroreflective, 2 m
E3F2-R2Z2 2M
Retroreflective, 2 m
E3F2-R2Z1-E 2M
Retroreflective, 2 m
E3F2-R2Z2-E 2M
Retroreflective, 2 m
E3F2-DS10Z1-N 2M
Diffuse reflective, 0.1 m
E3F2-DS10Z2-N 2M
Diffuse reflective, 0.1 m
* Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable
(e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.
E3F2-@Z
Appearance
Connection
method
pre-wired
axial
pre-wired
axial
pre-wired
axial
Connection
Appearance
(cable-length)
axial
Pre-wired (2 m)* N.A.
axial
Pre-wired (2 m)* Light-ON Receiver only
axial
Pre-wired (2 m)* Dark-ON Receiver only
axial
Pre-wired (2 m)* Light-ON Receiver and Emitter
axial
Pre-wired (2 m)* Dark-ON Receiver and Emitter
axial
Pre-wired (2 m)* Light-ON Non-polarizing, incl. E39-R1
axial
Pre-wired (2 m)* Dark-ON Non-polarizing, incl. E39-R1
axial
Pre-wired (2 m)* Light-ON Non-polarizing, including reflector
axial
Pre-wired (2 m)* Dark-ON Non-polarizing, including reflector
axial
Pre-wired (2 m)* Light-ON Wide-beam characteristic
axial
Pre-wired (2 m)* Dark-ON Wide-beam characteristic
Sensing
Model
distance
Light-ON
3 m
E3F2-3Z1
0.1 - 2 m
(with
E3F2-R2Z1-E
reflector
E39-R1)
0.1 m
E3F2-DS10Z1-N
Control
Comments
output
Emitter only
Dark-ON
E3F2-3Z2
E3F2-R2Z2-E
E3F2-DS10Z2-N
1

Advertisement

loading

Summary of Contents for Omron E3F2-Z

  • Page 1 Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable (e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.
  • Page 2 Typical sensing distance corresponds to 80 % of the max. sensing distance. The enclosure rating IP67 of OMRON internal standards correspond to stricter test requirements than the standard IEC 60529 (refer to chapter “Precautions”) For other cable materials (e.g. PUR) please contact your OMRON sales representative.
  • Page 3 Object –300 –300 –30 Distance X (m) Distance X (m) Distance X (mm) Excess Gain Ratio vs. Distance (typical) Through-beam Models (axial) Retroreflective Models (axial) Diffuse reflective Models (axial) E3F2-3Z# E3F2-R2Z# (non polarizing) and reflectors E3F2-DS10Z-# (wide-beam type) Sensing object:...
  • Page 4 Separate the wiring, or use shielded lines as • 2.0 Nm ( 20 kgf cm) when tightening mounting nuts for plastic mod- input/output lines to the photoelectric sensor.

This manual is also suitable for:

E3f2-3z1E3f2-3z2E3f2-r2z1E3f2-r2z2E3f2-ds10z1E3f2-ds10z2