Table of Contents
Advertisement
D4GS-N#T-# + D4GS-NK1
Red
Black
Key insertion face
(12.3±1)
(See note.)
Key insertion
radius
(R ≥ 160)
13.5 to 16
Key insertion
position
Note: Mount with dimen-
sion of 11.6 for
160 £ R £ 240.
D4GS-N#R-# + D4GS-NK4
Red
Adjusting screw
21.5 to 24
Key insertion
position
Black
Note: 1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
G-170
Key insertion
radius
(R ≥ 170)
13.5 to 16
Key insertion
position
Key insertion face
(12.3±1)
Key insertion
(See note.)
radius
(R ≥ 160)
13.5 to 16
Key insertion
position
Note: Mount with dimen-
sion of 13 for
160 £ R £ 240.
Key insertion
radius
(R ≥ 50)
Note 1: When determining the opera-
tion key insertion radius, ad-
just the adjusting screw so
that the tip of the operation
key is positioned to the cen-
ter of the key insertion hole
of the Switch.
Note 2: The operation key cannot be
inserted or adjusted in a
direction different from the
one shown above.
Use the D4GS-NK1 or
D4GS-NK2 if necessary.
D4GS-N#T-# + D4GS-NK2
Red
Black
Key insertion radius
(R ≥ 160)
(21±1)
Key
(See note.)
insertion
face
5.4 to 7.9
Key insertion
positio
Note: Mount with dimen-
sion of 20.3 for
160 £ R £ 240.
D4GS-N#T-# + D4GS-NK4
Red
Black
Key insertion
radius
(R ≥ 170)
5.4 to 7.9
Key insertion
Key insertion face
position
Key insertion
radius
(R ≥ 160)
Key insertion
(21±1)
face
(See
note.)
5.4 to 7.9
Key insertion
position
Note: Mount with dimen-
sion of 21.7 for
160 £ R £ 240.
Key insertion
radius
(R ≥ 50)
Adjusting screw
21.5 to 24
Key insertion
position
Note 1: When determining the opera-
tion key insertion radius, ad-
just the adjusting screw so
that the tip of the operation
key is positioned to the cen-
ter of the key insertion hole
of the Switch.
Note 2: The operation key cannot be
inserted or adjusted in a
direction different from the
one shown above.
Use the D4GS-NK1 or
D4GS-NK2 if necessary.
Safety Sensors / Components
Advertisement
Table of Contents
