Omron CJ - 08-2008 Operation Manual page 715

CJ1W-CIF11 RS-422A Converter
Dimensions
5.8 38.8
DIP Switch Settings, Wiring, and Installation
The DIP switch settings must be changed to perform communications according to settings other than the
default settings.
1. Remove the DIP switch cover using a flat-bladed screwdriver in the way shown below.
Note Press the cover gently while removing it to prevent it from popping out suddenly.
2. Using a fine pair of tweezers or other tool with a fine point, change the settings of the DIP switch pins to
match the desired communications conditions.
3. Be sure to remount the cover after finishing the DIP switch settings.
All the pins are factory-set to OFF.
18.2
O
1
N
2
3
4
5
O
6
N
Appendix G
667