Doing A Frequency Check - Sennheiser SKM 5200 Instructions For Use Manual

Doing a frequency check

The radio microphone has a frequency check mode that prevents
that the radio microphone transmits on an unwanted frequency
after switch-on.
MHz
If you want to select another frequency, proceed as follows:
Release the red button
Within five seconds, press the multi-functions switch
(switch position
You will be passed to the "
change the transmission frequency as required. (See "Adjust-
ment tips for the operating menu" on page 23.)
Identifying the radio microphone
The radio microphone comes with nine interchangeable color-
coded identification markers, allowing you to clearly identify each
radio microphone.
14
When switching on the device, keep
the red button
The current frequency is displayed
on the display panel without the ra-
dio microphone transmitting.
If the displayed frequency is the
wanted frequency, you can release
the red button
RF
After five seconds the "RF"
appears and the radio microphone
starts transmitting.
.
SET
).
CHAN
To
marker, press the two snap-in pins
together
identification marker out of the
guide rails.
Put on the new identification
marker by sliding it onto the guide
rails.
depressed.
.
TUNE
" or "
remove the
while
icon
twice
" menu and can
identification
sliding the