Working With The Operating Menu - Sennheiser SKM 5200 Instructions For Use Manual

Working with the operating menu

The operating menu has three modes:
Display mode
In display mode, you can display the current menu settings one
after the other – even when the lock mode is activated.
Selection mode
In selection mode, you can select the menu whose setting you
want to change. To change to the selection mode, the lock mode
must be deactivated.
Setting mode
In setting mode, you can change the setting of the selected
menu.
By way of example of the "
how to use the operating menu.
Display mode
SET/ON
MHz
MHz
LOWCUT
SET
SET
MHz
SET
MHz
Current
low-cut-frequency
" menu, this section describes
Selection mode
TUNE
SET
LOWCUT
Adjusting the
low-cut-frequency
STORED
SET
Setting mode
120
Hz
Current
low-cut-frequency
190
Hz
FLAT,
120 Hz, 190 Hz
17