Sennheiser SKM 5200 Instructions For Use Manual page 16

After switch-on
After switch-on, the standard display is shown on the display
panel. Depending on the setting, the transmission frequency, the
channel number or the name of the radio microphone is displayed.
Displaying the menu settings in display mode
In display mode, and with the lock mode activated, you can display
the current menu settings one after the other (see "Overview of
the operating menu" on page 21). After a few seconds, the display
returns to the standard display. With the lock mode activated, the
LC display is not backlit.
UP
SET
DOWN
Changing to the selection mode
To change from display mode to selection mode, you have to
deactivate the lock mode.
Deactivate the lock mode (see "Deactivating the autolock
function temporarily" on page 16). You can now select the
menu whose settings you want to adjust.
Press the multi-function switch
change to the menu that was displayed in display mode.
Selecting a menu
UP
SET
DOWN
18
Slide the multi-function switch
the position
display the menu settings. If you slide
the multi-function switch repeatedly
to the same position, all menu
settings are displayed one after the
other.
(switch position
Slide the multi-function switch
the position
Press the multi-function switch
(switch position
The name of the selected menu starts
flashing.
(UP) or (DOWN) to
(UP) or (DOWN).
SET
).
to
SET
) to
to