Deactivating The Lock Mode Temporarily - Sennheiser SK 500 G3 - 01-09 Instruction Manual

To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see page 13).
Keep the
appears on the display panel. The red
goes off and the display panel turns off.
When in the operating menu, pressing the ON/
OFF button will cancel your entry (ESC function) and
return you to the current standard display.
To switch the bodypack transmitter on and to
the RF signal on switch-on
Keep the
On?" appears on the display panel.
Press the
The transmission frequency is displayed but the
bodypack transmitter does not transmit an RF
signal. The transmission icon
When the pilot tone function is activated on both
bodypack transmitter and receiver,
appears on the receiver's display panel.
AF
Use this function to save battery power or to
prepare a bodypack transmitter for use during live
operation without causing interference to existing
transmission links.
To activate the
Briefly press the
"RF Mute
Press the
The transmission icon

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via
the "Auto Lock" menu item (see page 23).
If the lock mode is activated, you have to temporarily
deactivate it In order to be able to operate the bodypack
transmitter:
Press the
"Locked" appears on the display panel.
Press the rocker button.
"Unlock?" appears on the display panel.
ON/OFF
(offline operation):
ON/OFF
SET button.
542.625 MHz
ew500 G3
P
MUTE
RF signal:
Off?" appears on the display panel.
SET button.
SET button.
Using the bodypack transmitter
button pressed until "OFF"
button pressed until
ON/OFF button.
is displayed again.
ON LED
deactivate
"RF Mute
is not displayed.
"RF Mute"
13