Sennheiser SK 500 G3 - 01-09 Instruction Manual page 16

From the
setting (see page 25).
Exit the operating menu.
Slide the
position MUTE.
The bodypack transmitter reacts as indicated in the
table.
The current state of the muting function or the RF signal is
displayed on the display panel of the bodypack transmitter.
An additional display of the muting function
appears on the receiver's display panel when
• the pilot tone function is activated on both
bodypack transmitter and receiver
and, in addition,
• this display has been activated via the
"Warnings" menu item on the receiver (see the
instruction manual of the receiver).
MHz
542.625
ew500 G3
P
MUTE
AF
Audio signal is muted
Transmitter's display panel: "MUTE"
Receiver's display panel:
* only when activated on the receiver (see previous
section)
Audio signal is activated (muting is deactivated)
Transmitter's display panel: "MUTE"
Receiver's display panel:
RF signal is deactivated
Transmitter's display panel: transmission icon
Receiver's display panel:
* only when activated on the receiver (see previous
section)
RF signal is activated
Transmitter's display panel: Transmission icon
Receiver's display panel:
"Mute Mode" menu item, select the desired
MUTE switch
Using the bodypack transmitter
MUTE to the left, to the
"TX Mute" is
"TX Mute" is not displayed
displayed,
"MUTE"
"RF Mute" is
displayed,
"MUTE"
"RF Mute" is not displayed
is displayed
displayed*
is not displayed
is not
is displayed
displayed*
is
is not displayed
15