Sennheiser SK 500 G3 - 01-09 Instruction Manual page 26

Advanced Menu
Tune
542.625 MHz
Call up "Tune"
(special function)
Set the desired frequency bank.
Press the
The frequency selection appears.
Set the desired channel.
Press the
The frequency selection appears.
Set the desired frequency.
Press the
Your settings are stored.
You are back to the operating menu.
Setting the mode for the MUTE switch – "Mute Mode"
Advanced Menu
Mute Mode
AF On/Off
Call up "Mute
Mode"
Mode
"AF On/Off"
"RF On/Off"
"Disabled"
For information on how to use the
page 14.
Adjusting the transmission power – "RF Power"
Advanced Menu
RF Power
Standard
Call up
"RF Power"
Via the "RF Power" menu item, you can adjust the transmis-
sion power in two steps.
It is vital to observe the notes on the supplied
frequency information sheet.
Adjusting settings via the operating menu
SET
Tune
542.625 MHz
B.Ch: U1. 1
Set the frequency
bank and the channel
"Stored"
SET button.
SET button.
SET button.
SET
Mute Mode
AF On/Off
Select the desired
setting
"Stored"
Function
When the switch is in the
tion, no audio signal is transmitted.
When the switch is in the
tion, the RF signal is deactivated.
The muting function is deactivated.
SET
RF Power
Standard
Select the desired
setting
"Stored"
SET
Tune
542.625 MHz
B.Ch: U1. 1
Set the frequency;
store the setting
Mute Mode
RF On/Off
Store the setting
MUTE
MUTE
MUTE switch, refer to
RF Power
Low
Store the setting
SET
SET
posi-
posi-
SET
25