Deactivating The Lock Mode Temporarily; Selecting A Standard Display - Sennheiser EK 300 IEM Instruction Manual

Using the diversity receiver

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
Lock" menu item (see page 16). If the lock mode is activated, you have to
temporarily deactivate it in order to be able to operate the receiver:
Press the
SET
"Locked" appears on the display panel.
Press the UP/DOWN button
"Unlock?" appears on the display panel.
Press the
SET
– When you are in the operating menu, the lock mode remains
deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
The lock mode icon
823.925
ew300 IEM
MUTE
P
RF AF

Selecting a standard display

Press the
ESC
mode (see page 16), you can alternatively press the UP/DOWN
button
Contents of the display
519.150
ew300 IEM
MUTE
P
RF AF
B.CH 1.1
Lim: - 6dB
P
RF AF
519.150
EQ
P
RF AF
For more detailed information, refer to the chapter "Overview of the
displays" on page 6.
10
SET button.
SET button.
flashes prior to the lock mode being activated again.
MHz
ESC button to select a standard display. In stereo
/ .
Selectable standard display
"Frequency/Name"
MHz
with "MUTE" display
"Frequency/Limiter"
with display of the audio channels
(Stereo/Focus)
"Frequency/High
MHz
with display of the audio channels
(Stereo/Focus)
/ .
Boost"
"Auto