Deactivating The Lock Mode Temporarily - Sennheiser SK 2000 Instruction Manual

Using the bodypack transmitter
SET
Press the
The transmission frequency is displayed but the bodypack
transmitter does not transmit an RF signal. The transmission
icon
activated on both bodypack transmitter and receiver,
"RF Mute" appears on the receiver's display panel.
543.200
**2000**
P
AF
Use this function to save battery power or to prepare a bodypack
transmitter for use during live operation without causing inter-
ference to existing transmission links.
To activate the RF
Press the
ON/OFF
"RF Mute
SET
Press the
The transmission icon
To switch the bodypack transmitter off:
If necessary, deactivate the lock mode (see next chapter).
Keep the
ON/OFF
the display panel. The red
panel turns off.
When in the operating menu, pressing the
cancel your entry (ESC function) and return you to the current
standard display.

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
Lock" menu item (see page 23). If the lock mode is activated, you have to
temporarily deactivate it in order to be able to operate the bodypack
transmitter:
Press the
SET ON/OFF
"Locked" appears on the display panel.
Press the rocker button.
"Unlock?" appears on the display panel.
12
SET button.
is not displayed. When the pilot tone function is
MHz
MUTE
signal:
ON/OFF button.
Off" appears on the display panel.
SET button.
ON/OFF button
SET button or the
is displayed again.
pressed until "OFF" appears on
ON LED goes off and the display
ON/OFF
ON/OFF button.
button will
"Auto