Sennheiser SK 2000 Instruction Manual page 26

Setting the mode for the MUTE switch – "Mute Mode"
Advanced Menu
Mute Mode
Call up
"Mute Mode"
Mode
"AF On/Off"
"RF On/Off"
"Disabled"
For information on how to use the
Adjusting the transmission power – "RF Power"
Advanced Menu
RF Power
Call up
"RF Power"
Via the "RF Power" menu item, you can adjust the transmission power in
three steps ("Low", "Standard", "High").
It is vital to observe the notes on the enclosed frequency informa-
tion sheet!
Adjusting settings via the operating menu
Mute Mode
AF On/Off
Select the desired
setting
"Stored"
Function
When the switch is in the
signal is transmitted.
When the switch is in the
deactivated.
The muting function is deactivated.
RF Power
Standard
Select the desired
setting
"Stored"
MUTE position, no audio
MUTE position, the RF signal is
MUTE switch , refer to page 13.
Mute Mode
RF On/Off
Store the setting
RF Power
Low
Store the setting
25