Putting The Bodypack Transmitter Into Operation; Inserting The Batteries/Accupack; Charging The Accupack; Connecting The Microphone Cable/Instrument Cable - Sennheiser SK 100 G3 Instruction Manual

Putting the bodypack transmitter into operation

Putting the bodypack
transmitter into operation

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use
two 1.5 V AA size batteries or the rechargeable Sennheiser
BA 2015 accupack (see "Accessories and spare parts" on
page 30).
Open the battery compartment by pushing the two
catches
cover .
Insert the two batteries or the accupack as shown
above. Please observe correct polarity when inserting
the batteries/accupack.
Close the battery compartment.
The battery compartment cover
an audible click.

Charging the accupack

To charge the bodypack transmitter with the BA 2015
accupack (see "Accessories and spare parts" on page 30)
installed:
Insert the bodypack transmitter into the L 2015 charger
(see "Accessories and spare parts" on page 30).
The L 2015 charger can only charge the combination
BA 2015 accupack/bodypack transmitter. Standard
batteries (primary cells) or individual rechargeable
battery cells cannot be charged in this way.
Connecting the microphone cable/
instrument cable
The audio input is designed for the connection of both
condenser microphones and instruments (e.g. guitars).
DC powering of the condenser microphones is via the audio
input (3.5 mm jack socket
8
in the direction of the arrows and open the
MIC/LINE
locks into place with
).