Putting The Bodypack Transmitter Into Operation; Inserting The Batteries/Accupack; Charging The Accupack; Connecting The Microphone Cable/Instrument Cable - Sennheiser SK 500 G3 User Manual

ew G3 SK 500_529695_0109_SP8_PRT.book Seite 8 Donnerstag, 5. Februar 2009 12:43 12

Putting the bodypack transmitter into operation

Putting the bodypack transmitter into
operation

Inserting the batteries/accupack

For powering the bodypack transmitter, you can either use two 1.5 V AA
size batteries or the rechargeable Sennheiser BA 2015 accupack.
Open the battery compartment by pushing the two catches
direction of the arrows and open the cover µ.
¸
¸
µ
Insert the two batteries or the accupack as shown above. Please
observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover
click.

Charging the accupack

To charge the BA 2015 accupack:
Insert the bodypack transmitter into the L 2015 charger (optional
accessory).
The L 2015 charger can only charge the combination BA 2015
accupack/bodypack transmitter. Standard batteries (primary
cells) or individual rechargeable battery cells cannot be charged.

Connecting the microphone cable/instrument cable

The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input (3.5 mm jack socket
Use one of the recommended Sennheiser microphones or the optional
CI 1 instrument cable (see pagec4).
Connect the 3.5 mm jack plug
instrument cable to the 3.5 mm jack socket
Lock the 3.5 mm jack plug by screwing down the coupling ring
the cable.
Via the operating menu, adjust the sensitivity of the microphone/line
input (see pagec17).
8
¸
in the
µ
locks into place with an audible
³).
MIC/LINE
from the Sennheiser microphone or
³.
MIC/LINE
³
of