Download Print this page

Sennheiser EM 100 G3 Specifications

Stationary receiver
Hide thumbs Also See for EM 100 G3:

Advertisement

EM 100 G3
FEATURES
Sturdy metal housing

42 MHz bandwidth: 1680 tunable UHF

frequencies for interference-free reception
Enhanced frequency bank system with up

to 12 compatible frequencies
High-quality true diversity reception

Pilot tone squelch for eliminating RF inter-

ference when transmitter is turned off
Automatic frequency scan feature

searches for available frequencies
Enhanced AF frequency range

Wireless synchronization of transmitters

via infrared interface
User-friendly menu operation with more

control options
Illuminated graphic display

Auto-Lock function avoids accidental

changing of settings
HDX compander for crystal-clear sound

Receiver features transmitter battery

indicatation in 4 steps
Integrated Equalizer, Soundcheck mode

and guitar tuner
Wide range of accessories adapts the

system to any requirement
Optimized PLL synthesizer and micropro-

cessor technology
Stationary receiver
With its improved design and new features, this rugged G3 rack receiver is ready
for the road with its proven transmission reliability and inspiring flexibility. The
sound check mode allows you to check the audio and RF signal at any time during
setup. 20 frequency banks with 12 preset frequencies each, plus a user-program-
mable bank mean you can easily run multiple channels of G3 wireless simultane-
ously.

TECHNICAL DATA

Modulation ...............................................................wideband FM
Frequency ranges.................................................... 516 – 558, 566 – 608, 626 – 668,
Receiving frequencies ............................................ 1,680 frequencies, tuneable in steps
Switching bandwidth .............................................42 MHz
Nominal/peak deviation .......................................± 24 kHz/± 48 kHz
Receiver principle ....................................................true diversity
Sensitivity (with HDX, peak deviation) .............< 2 μV for 52 dBA rms S/N
Adjacent channel rejection ...................................typ. ≥ 65 dB
Intermodulation attenuation ...............................typ. ≥ 65 dB
Blocking .....................................................................≥ 70 dB
Squelch ...................................................................... Off, Low: 5 dBmV, Middle: 15 dBmV,
Pilot tone squelch ...................................................can be switched off
Antenna inputs........................................................2 BNC sockets
Compander system .................................................Sennheiser HDX
EQ presets
Preset 1: "Flat"
Preset 2: "Low Cut" ................................................−3 dB at 180 Hz
Preset 3: "Low Cut/High boost" .......................... −3 dB at 180 Hz
734 –776, 780 – 822, 823 – 865 MHz
of 25 kHz
20 frequency banks, each with
up to 12 factory-preset channels,
intermodulation-free
1 frequency bank with up to 12
user programmable channels
High: 25 dBmV
+6 dB at 10 kHz
Continued on page 2

Advertisement

loading

Summary of Contents for Sennheiser EM 100 G3

  • Page 1: Technical Data

    EM 100 G3 Stationary receiver FEATURES With its improved design and new features, this rugged G3 rack receiver is ready for the road with its proven transmission reliability and inspiring flexibility. The Sturdy metal housing sound check mode allows you to check the audio and RF signal at any time during 42 MHz bandwidth: 1680 tunable UHF setup.
  • Page 2: Specifications

    190 x 212 x 43 mm (7.48“ x 8.35“ x 1.69“). Weight shall be approximately 980 grams (2.16 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131 °F). The receiver shall be the Sennheiser EM 100 G3.
  • Page 3 EM 100 G3 Stationary receiver DIMENSIONS CONNECTIvITy...
  • Page 4: Recommended Accessories

    Cat. No. 503525 NT 2-3 US – Mains unit for powering the EM 100 G3-E-EU – 823...865 MHz / EM 100 G3 stationary receiver, 120 V version Cat. No. 503870 Power supply unit EU Cat. No. 503526 NT 2-3 UK – Mains unit for powering the EM 100 G3-E-EU-X –...