Sennheiser SET 900 - 07-08 Instruction Manual page 33

Particularities of operating mode 2:
In operating mode 2, the transmitter is
signal from the sound source.
To switch the transmitter on:
Take the receiver out of the charging compartment.
To switch the transmitter off:
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge
its rechargeable battery during operation:
8
Pull the battery out of the receiver's battery
compartment
Insert the battery into the charging
compartment
mitter (see "Removing and charging the
receiver's battery" on page 18).
Slide the battery into the transmitter's
charging compartment
0
Additional technical information
not switched on by the sound
8
.
0
at the side of the trans-
0
as far as it will go.
29