Sennheiser SET 900 - 07-08 Instruction Manual page 17

1
1
Channel
indicator
If you still haven't found your sound source, press the
channel search button
Notes:
– The channel indicator
that the light won't disturb you in a dark room.
– When using the receiver without the transmitter on
the move (e.g. in a theater), please note that different
information can be transmitted on the channels. Ask
an employee of the venue which information is trans-
mitted on which channel.
Put the receiver on.
The channel indicator
receiver lights up:
For an overview of the channel indi-
cator indications, see table below.
Do you hear the desired sound
source?
Yes:
The receiver has already found the
sound source.
No:
Briefly press the channel search
7
7
button
The sound source is searched for. On
the receiver, the channel indicator
can light up as follows:
Frequency
2.3+2.8 MHz
2.3 MHz
2.8 MHz
95 kHz
7
once more.
goes off after 30 seconds so
Using the Set 900
.
You hear
the sound in
stereo
mono
on the
13