You Change The Position Of This Control/Switch; You Hear Acoustic Signals Or Warning Signals - Sennheiser SET 830 S Instruction Manual

What if...

...you change the position of this control/switch?

Control/switch
Volume control
on the receiver
Balance control
on the receiver
Mono/stereo slide
F
switch on the
transmitter
Treble adjust-
ment control
on the transmitter

...you hear acoustic signals or warning signals?

Acoustic signal
3 ascending beeps
2 descending beeps
1 acknowledgement
beep
1–2 short beeps
22
Function
2
Reduces or increases the
volume of the receiver.
4
Increases the volume for the
left or the right ear.
Sets the transmitter to mono
or stereo operation.
Treble adjustment is only to
G
be made by a hearing aid
technician / an expert.
Meaning
The receiver has just
been switched on.
The receiver has just
been switched off.
The channel search
button has been
pressed once briefly.
The channel search
button has been
pressed for
5 seconds.
The receiver is set to
channel 1 or 2.
Page
16
17
17
28