Connecting The Transmitter To The Mains - Sennheiser SET 830 S Instruction Manual

Putting the Set 830 S into operation

Connecting the transmitter to the mains

N
UK
EU
Notes:
– When connecting the transmitter to the mains
for the first time, charge the rechargeable
battery for 3 hours as described in the chapter
"Storing and charging the receiver" on
page 19.
– If there is no audio signal from the sound source
for about 3 minutes, the transmitter automatically
switches off. The operation indicator
10
M
US
H
M
Select the suitable country
N
adapter
socket.
Slide the supplied country
adapter onto
M
unit .
Connect the yellow connector
of the mains unit to the yellow
H
socket of the transmitter.
Plug the mains unit
wall socket.
The operation indicator
on the transmitter lights up
green.
for your wall
the mains
M
into a
B
3h
goes off.