Switching The Receiver On/Off - Sennheiser SET 830 S Instruction Manual

Switching the receiver on/off

CAUTION!
1
3
To switch the receiver off:
Press the on/off button
goes off.
Notes:
– For how to store and charge the receiver,
see page 19.
– If you are not within the range of the trans-
mitter, the receiver automatically switches off
after 3 minutes.
Hearing damage due to high volumes!
This receiver allows you to set higher
volumes than conventional headphones.
This can cause hearing damage in persons
with healthy hearing and especially in chil-
dren.
Before using the receiver, set the volume
on the receiver to a low level.
Do not continuously expose yourself to
high volumes.
To switch the receiver on:
Press the on/off button
channel indicator
The channel indicator
30 seconds.
3
Using the Set 830 S system
1
lights up.
1
until the channel indicator
3
until the
goes off after
1
3h
15