Using the Set 830 S system
Adjusting the volume
Searching for a sound source
Switch the receiver on.
Do you hear the desired sound source?
Yes:
The receiver has already found the sound source.
1
5
Channel
indicator
If you have not yet found your sound source, press the
channel search button once more.
If you still cannot find your sound source:
Read the chapter "If a problem occurs ..." on page 24.
Note:
The channel indicator
that the light won't disturb you in a dark room.
16
Use the volume control
the volume to a sufficient and
comfortable level.
No:
Briefly press the channel search
5
button
.
The sound source is searched for.
On the receiver, the channel indi-
1
cator
can light up as follows:
Frequency
2.3+2.8 MHz
2.,3 MHz
2.8 MHz
goes off after 30 seconds so
2
to adjust
You hear the
sound in
stereo
mono