Switching The Pxc 310 Bt On/Off - Sennheiser PXC 310 BT Instruction Manual

Putting the PXC 310 BT into operation
1
5
1
5
12

Switching the PXC 310 BT on/off

CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headphones also sound exceptionally good at low
volumes.
Set the volume to a comfortable level.
Switching the PXC 310 BT on
Press the Master button
flashes blue. You hear an ascending beep.
– When switching the headphones on
matically go into pairing mode.
The headphones are waiting to be paired with a Bluetooth enabled
device (see page 13).
– When the headphones
Bluetooth connection is automatically established.
You hear an ascending beep and then your audio source.
– When the headphones
the audio source is switched off
blue.
The headphones will try for 3 minutes to connect to one of the up to
8 previously paired audio sources. If this fails, the headphones auto-
matically switch off after 60 minutes.
Switching the PXC 310 BT off
Press the Master button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headphones switch off.
and keep it pressed until the
for the first time, they will auto-
are already paired with an audio
are already paired with an audio source
or out of range, the
and keep it pressed until the
LED
source, the
but
LED flashes
LED