Switching The Px 210 Bt On/Off - Sennheiser PX 210 BT Instruction Manual

1
5
1
5

Switching the PX 210 BT on/off

CAUTION! Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headphones also sound exceptionally good at low
volumes.
Set the volume to a comfortable level.
Switching the PX 210 BT on
Press the Master button
flashes blue. You hear an ascending beep.
– When switching the headphones on
automatically go into pairing mode. The headphones are waiting to
be paired with a Bluetooth enabled device (see page 12).
– When the headphones
Bluetooth connection is automatically established. You hear an
ascending beep and then your audio source.
– When the headphones
the audio source is switched off
blue. The headphones will try for 3 minutes to connect to one of the
up to 8 previously paired audio sources. If this fails, the headphones
automatically switch off after 60 minutes.
Switching the PX 210 BT off
Press the Master button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headphones switch off.
Putting the PX 210 BT into operation
and keep it pressed until the
for the first
are already paired with an audio
are already paired with an audio source
or out of range, the
and keep it pressed until the
LED
time, they will
source, the
but
LED flashes
LED
11
DE
EN
FR
IT
ES
NL