Sennheiser EM 3731-II - ANNEXE 583 Instruction Manual page 37

Adjustment tips for the operating menu
Scan
Channel list
Scan new
Scan reset
Freq. occupied
1.
776.000
MHz
Channel list
Scan new
Scan reset
Bank 1 2 3
Free 43 40 42
Bank 4 5 6 U
Free 32 31 33 60
8
7
save
DEV
777.005 M
H
z
sync
U.01 BANK
AF COM
esc
CH
Freq. occupied
1.
776.000
MHz
36
Scanning the frequency banks for interference-free channels
Via the "Scan" menu, you can scan all frequency banks for free channels.
1
Displa
Change to the setting mode of the "Scan" menu.
The following selection appears:
– "Channel list"
displays the number of free channels for each frequency bank from
the last scan.
– „Scan new"
scans all frequency banks and displays the number of free channels
for each frequency bank.
– „Scan reset"
B.Ch
releases channels that were occupied or subject to interference
during the last scan (these channels a marked with a warning
triangle and
Displaying a list of all free channels
Via the "Channel
then select a suitable frequency bank and a channel.
Turn the jog dial
Press the jog dial 7.
A table displays the number of free channels for each of the seven
frequency banks.
Turn the jog dial
of free channels.
Press the save
The selected frequency bank is automatically called up in the "Bank.Ch"
menu.
digital audio
processing
Select a channel from this frequency bank (see "Selecting a frequency
sync
bank and a channel" on page 30).
After the scan, the channels that are occupied or subject to
B.Ch
interference are marked with a warning triangle and
occupied".
"Freq. occupied".
list" menu, you can display the last scan result. You can
7
until the arrow points to
7
to select a frequency bank with a sufficient number
button 8.
"Channel list".
"Freq.