Sennheiser EM 3731-II - ANNEXE 583 Instruction Manual page 16

Mounting the antennas to the front of the rack
To mount the antenna connections to the front of the rack when rack
W
mounting the receiver, you require the GA 3030 AM antenna front mount
kit (optional accessory). The GA 3030 AM consists of:
• 2 BNC extension cables (screw-in BNC socket
Y
• 2 antenna holders Z,
X
• 4 screws,
• 2 washers Y,
• 2 nuts X.
Unsecure the rack mount "ears"
1
Guide the BNC cables through the holes in the rack mount "ears" as
-I I
shown in the diagram on the left.
W
Screw the antenna holders
W
washers
-I I
Y
Z X
Secure the antenna holders
Z
of the supplied screws respectively.
Connect the two BNC connectors
rear of the receiver.
Slide the receiver into the 19" rack.
Resecure the rack mount "ears"
Connect the antennas
Align the antennas upwards in a V-shape.
1
Z
to the BNC sockets
Y and nuts X.
Z
to the handles of the receiver using two
[
-II
[
to the BNC sockets
1
to the rack.
\ to the BNC sockets W.
Putting the receiver into operation
W to BNC connector [),
from the rack.
W
using the supplied
\
O R
and at the
15